Independent guide. Not affiliated with, endorsed by, or sponsored by Cricut. Cricut is named only to describe machines and materials.

Machine × material

What setting, blade, and pressure do you use?

Pick the machine you own and the material on the mat. The number on the page is copied from Cricut’s own material list, with the date it was checked. If that list has no row, the page says so. It does not borrow a number from a different machine.

Start with the question you actually have

Cricut Joy + glitter iron-on

Search “Smart Iron-On - Glitter” if the vinyl is Smart (matless). Published cut pressure 147, multi-cut Off, Cricut Joy Fine-Point. Sheet glitter iron-on on a mat is a different preset, pressure 180. Mirror either one. Test cut.

Open the full setting page

Explore 3 + chipboard

Explore 3 publishes Light Chipboard, 0.37 mm: pressure 327, multi-cut 2x, Fine-Point Blade. It does not publish a 1.5 mm or 2.0 mm chipboard row. Those use a Knife Blade on Maker machines.

Open the full setting page

Maker 3 + laminated sticker paper

Maker 3 does not publish “Laminated Printable Sticker Paper.” For Cricut white sticker paper with a green liner, the preset is pressure 115, multi-cut Off, Fine-Point Blade. Kiss cut is a Sticker-tool choice, not a different pressure.

Open the full setting page

Setting pages

Cricut Joy

Cricut Joy glitter iron-on settings

Joy presets for Smart Iron-On glitter and sheet Glitter Iron-On, with mirror, mat, pressure, and a test cut. Numbers are from Cricut’s Joy tab.

Cricut Explore 3

Cricut Explore 3 chipboard settings

Explore 3 publishes light chipboard at 0.37 mm only. Pressure 327, two passes, fine-point blade. Thicker chipboard is a Maker Knife Blade cut.

Cricut Maker 3

Cricut Maker 3 basswood settings

Maker 3 basswood at 1/16 in is pressure 750 and 14X passes. The 1/32 in row is 381 and 18X. Both use the Knife Blade. Explore 3 has no basswood row.

Cricut Maker 3

Maker 3 laminated sticker paper, kiss cut

Maker 3 has no “Laminated Printable Sticker Paper” row. Green-liner sticker paper is pressure 115. Kiss cut is the Sticker tool, not a separate pressure.

Machines with a page

Materials

Which machine can cut this?

A filterable table of these materials across Joy, Explore Air 2, Explore 3, Maker, Maker 3, and Venture. A blank cell means that machine’s published list has no row. It is not a guess.

Open the lookup